Color Concrete Mixer

Color concrete mixer is mainly suitable for color floor tile surface layer, color roof tile etc., because the mixing raw materials are water, cement, coal ash, stone powder, fine sand, also adding a small amount of pigment, that is, aggregate particle size is small, also adding color, so the long-term main problems are mainly as following: pilling mixing materials, resulting in uneven color distribution after product molding, bringing surface spots etc.; Inside the mixing drum, mixing tool is easy to stick and not easy to clean. Regarding to these problems, Pmixers PMC250,PMC330, PMC500, PMC750 model color concrete mixer has the following advantages:

1. Using the principle of counter-flow planet, the specially designed transmission device can realize the opposite direction of rotation and revolution, which can make the relative motion between materials more intense, that is, the mutual shear motion between materials is more intense. It avoids the clumping phenomenon generated when the material moves in the forward direction, and also has the crushing effect on the clumping phenomenon generated.

2. The mixing drum liner is made of special lining plate, which can ensure the bottom plane of the mixing drum 2-5mm, the circle arc error of the mixing drum 2-5mm. There are special disigned bottom scraper and side scraper, which can scrape off the residual materials in the mixing drum at any time, and there is no material accumulation in the mixing drum. For customers special requirements, it can use rapid stirring device, more effective to avoid pilling phenomenon.